Skip to content
LarchHVAC & Appliance · Bellingham (360) 525-9166 Book a visit

Where we work

Appliance repair from the border to the Skagit

Our technicians cover eleven communities and the small places between them, from Blaine and Sumas at the Canadian line to Burlington and Sedro-Woolley in Skagit County, and up the Mount Baker Highway as far as Glacier.

French-door refrigerator open for a repair check
CANADAI-5SR 542BellinghamFerndaleLyndenBlaineBirch BayEversonSumasSudden ValleyBurlingtonSedro-WoolleyMaple Falls
Schematic map: Whatcom County and the north edge of Skagit County. Distances are drive times from downtown Bellingham.
  • BellinghamIn townEvery neighborhood from Cordata and King Mountain to Fairhaven and Edgemoor, plus Chuckanut and Lake Samish. Soft lake water, a majority of renters, and plenty of stacked laundry.
  • Ferndale12–18 minFerndale and Custer, about 12–18 minutes up I-5. Mostly newer homes, city water from wells since 2011, and one of the towns hardest hit in November 2021.
  • Lynden20–28 minLynden and the farm roads off the Guide Meridian. Mostly single-family homes built since the 1990s, treated Nooksack River water, and open flats exposed to outflow wind.
  • Blaine25–30 minBlaine, Semiahmoo and Drayton Harbor, about 25–30 minutes north. City-run power, a city water system fed entirely by wells, and salt air along the shore.
  • Birch Bay22–30 minBirch Bay Village, Point Whitehorn and Birch Point. About 22% of homes stand unoccupied, many of them seasonal, so appliances often fail at the start of the season.
  • Everson22–30 minEverson and Nooksack, where the river spills toward Sumas in the big floods. Expect laundry rooms that took water in 2021 and again in 2025.
  • Sumas30–38 minSumas at the border crossing, with its own electric utility, untreated wells, the oldest housing in the county, and two major floods four years apart.
  • Sudden Valley15–25 minSudden Valley, Geneva and the Lake Whatcom shores, about 15–25 minutes east. Mostly owner-occupied houses, a third of them built in the 1970s.
  • Burlington22–28 minBurlington with Alger, Bow, Edison and Blanchard. town water in town, wells and septic on the farms, and a city ordered to evacuate in December 2025.
  • Sedro-Woolley30–38 minSedro-Woolley and SR 9 north through Wickersham, Acme and Van Zandt. Older houses in town, and manufactured homes on wells and septic out in the country.
  • Maple Falls33–40 minMaple Falls, Deming, Welcome, Kendall, Peaceful Valley and Glacier along the Mount Baker Highway: cabins, manufactured homes and propane kitchens where snow shapes the winter.

One service area, regular routes to every town

We measure distance from downtown Bellingham, and the towns farther out are regular stops on our routes. A refrigerator call in Maple Falls, about 33–40 minutes out, is as routine for us as one in Fairhaven. Our phone is staffed every day, and a visit that same day often works out in Sumas and Edison as well as in the Lettered Streets; it turns on the hour you call and the drive, and dispatch says at once whether today can work. There is no distance surcharge anywhere in the area.

A technician based on the Mount Baker Highway

One of our technicians is based out along the Mount Baker Highway, so Deming, Welcome, Kendall, Peaceful Valley, Maple Falls and Glacier are regular stops rather than a long detour. That counts for cabins left empty through the winter, where a frozen ice maker line or a freezer that quit during an outage is often discovered days later. It also counts in Kendall and Peaceful Valley, where nearly half of homes are manufactured, with compact laundry pairs and ranges that run on electricity or propane.

How the map changes what breaks

Water is the first difference. Bellingham and Sudden Valley drink very soft Lake Whatcom water, Ferndale has pumped from wells since 2011, Blaine relies on nine wells, and Sumas draws untreated water from wells about 80 feet deep, while Burlington and Sedro-Woolley get public water from a reservoir in the Cultus Mountain watershed. Rural homes everywhere are on private wells, which bring sediment into valves and screens.

Weather is the second. The November 2021 flood damaged about 85% of homes in Sumas and hit Everson, Ferndale and Lynden hard, and December 2025 flooded Sumas, Nooksack and Everson again while sending water into parts of Burlington, leaving washers, dryers and ranges to assess. Fraser outflow wind and deep cold hit the flatlands north of Bellingham hardest, freezing supply lines in garages, and salt air at Birch Bay and Blaine works on anything metal kept outdoors.

Six appliances, one file each

Tap a tab or let the folder turn on its own.

1 / 6

What callers ask us

Do you charge extra to reach Glacier, Sumas or Edison?

No. There’s no distance surcharge anywhere we work, so the diagnostic and repair prices are the same at the end of the Mount Baker Highway as they are near downtown Bellingham. Distance can affect timing, though: the phone is staffed every day, and whether someone can still get to you that day turns on the hour you call and the drive. The office tells you right away.

My town isn’t on the list. Do you still come?

Very likely. The eleven communities above cover a lot of smaller places in between: Custer, Nooksack, Geneva, Acme, Van Zandt, Welcome, Alger, Bow, Edison, Blanchard, Chuckanut and Lake Samish among them. Call (360) 525-9166 or type your address into the booking form, and we’ll confirm before anything is scheduled. If an address is outside our area, we tell you then.

Is there anything to arrange for a Sudden Valley visit?

Sometimes. The Sudden Valley Community Association owns the roads there and sets its own rules for access and parking. If your street has parking limits, or the house is reached by a private drive or a steep lot, note it in the booking form or tell us on the phone. It helps the technician arrive at the right door with time to spare.

Will a repair cost more in a rural part of the county?

No. We add nothing for distance, and Glacier is as regular a stop for us as the Lettered Streets. What a repair comes to depends on the appliance and the fault, and the same part can be priced far apart from one make or parts source to the next, so repair prices stay off this site. The technician meters the appliance and puts one repair total on paper before starting.

Set up the visit

Wherever you live between the border and the Skagit, call (360) 525-9166 or book online.

Book a visit

Request a technician

Leave a few details and a dispatcher rings you back to agree on an arrival window. Someone picks up all week, and a request sent before mid-morning has the likeliest shot at a visit the same day.

  • The fee comes off any repair you go ahead with
  • Model number in the form so the right part rides along
  • A second machine? List it in the form and the technician checks it too

Prefer to talk? (360) 525-9166 · Calls daily 8–7

These details are used only to set up your visit. The diagnostic fee is named when we call back and is credited to any repair you approve.

State records

On file with Washington L&I

Both credentials are public state records. Tap a card for details, or look the numbers up yourself on L&I Verify.

Check our licenses yourself
CallBook a visit